論文リスト | |||
大木順司,花表裕司,倉本賢尚,鈴木道之,合田公一 一方向繊維強化セラミックス基複合材料の疲労寿命予測 日本機械学会論文集A編,第76巻,第767号,pp.955-960 (2010) |
|||
坂田義太朗,佐伯壮一,斉藤俊,大木順司 Optical Coherence Straingraphy を用いた平織り繊維強化ゴムにおけるマイクロメメカニクスの断層可視化 日本機械学会論文集A編,第76巻,第766号,pp.770-776 (2010) |
|||
土井貴文,伊藤昌弘,加治岳士,中村理恵,合田公一,大木順司 繰返し引張負荷によるラミー麻繊維及びラミー麻糸グリーンコンポジットの特性改善 複合材料学会誌,第35巻,第2号,pp.56-63 (2009) |
|||
Y.Torii, K.Nagahiro, J.Ohgi, M.Suzuki, K.Goda, J.Noda Cyclic Behaviors of SiC/SiC Composites under Fatigue Loading Proceedings of the 5th Asian-Australasian Conference on Composite Materials (ACCM-6) (2008) |
|||
R.Nakamura, K.Goda, J.Noda, J.Ohgi High Temperature Mechanical Properties and Deep Drawing of Fully Green Composites Journal of Express Polymer Letters: Vol.3, No9.1, pp.19-24 (2009) |
|||
J.Ohgi, K.Goda Fatigue Properties of CMC with Porous Matrix Proceedings of 13th European Conference on Composite Materials (2008) |
|||
R.Nakamura, H.Nomura, K.Goda, J.Ohgi Effect of Yarn Twist on Young's Modulus of Fully-green Composites Reinforced with Ramie Woven Fabrics Proceedings of 13th European Conference on Composite Materials (2008) |
|||
田辺克典,松尾貴則,A.Gomes,合田公一,大木順司 断面積変動を考慮したクラワ繊維の強度評価 材料,第57巻,第5号 pp.454-460 (2008) |
|||
A.Gomes, T.Matsuo,K.Goda and J.Ohgi Development and effect of alkali treatment on tensile properties of curaua fiber green composites Composites: Part A 38 pp.1811-1820 (2007) |
|||
K.Goda, M.S.Sreekala, A.Gomes, T.Kaji and J.Ohgi Improvement of Plant Based Natural Fibers for Touhgning Green Composites - Effect of Load Application during Mercerization of Ramie Fibers Composites: Part A 37 pp.2213-2220 (2006) |
|||
J. Ohgi,S. Tanaka,T.Kuramoto,M. Suzuki and K.Goda Stress-strain Response in SiC/SiC Composites under Cyclic Loading Proceedings of Asian Pacific Conference on Fracture and Strength(APCFS'06) (2006) |
|||
Y.Fujita, J.Ohgi, H.Motomura, K.Goda Strength and Fracture Toughness in Multilayer CMC under Three-point Bending Proceedings of the 5th Asian-Australasian Conference on Composite Materials (ACCM-5) (2006) |
|||
R.Nakamura, M.S.Sreekala, K.Goda, J.Ohgi and H.Jouyou Plastic Deformation Behaviour of Textile Green Composites using a Plain Woven Ramie Fabric Proceedings of 12th European Conference on Composite Materials (ECCM 12) (2006) |
|||
K.Hatanaka, Y.Ishiga, R.Kawazoe, M.Hasui, J.Ohgi, H.Ogawa Unelastic Deformation and its Related Life under Cyclic/creep Loadings in Si3N4-monolithic and Si3N4/SiCw-composite Ceramics at Elevated Temperature Materials Science & Engineering A, 468-470 (SPEC. ISS) (2007) pp.273-280 |
|||
K.Fujita, J.Ohgi, V.Vitek, T.Zhang and A.Inoue Molecular Dynamics Simulation on Anelasticity underTensile and Shearing Stress in Single Component Amorphous Metal Materials Transactions, Vol.46, No.12 pp.2875-2879 (2005) |
|||
J.Ohgi and A.S.Kobayashi Inverse Hybrid Analysis of Fracture Process in Ceramic Matrix Composites Proceedings of International Conference on Computational Engineering & Sciences 2005 (ICES’05) (2005) |
|||
K.Hatanaka, K.Thet and J.Ohgi Low Cycle Fatigue Life Estimation in Notched Components in SUS316 Stainless Steel at 550℃ Proceedings of 5th International Conference on Mechanics of Time-dependent Materials (MTDM 2005) (2005) |
|||
J. Ohgi, K. Goda, A.S. Kobayashi, F.Tsukahara,
A.Shintani An Assessment of Fiber Bridging Effect in CMC by Laser Moir Interferometry Method Proceedings of 2004 SEM Annual Conference (2004) |
|||
合田公一、大木順司、玉置純一、鈴木道之 セラミックス基繊維強化複合材料の界面接触モデルによるFEM定式化と強度シミュレーション 複合材料学会誌,第31巻,第4号 pp.184-191 (2004) |
|||
三輪順和,加瀬部宗徳,合田公一,大木順司,長束悟志,児玉斎 繊維表面特性の異なるCFRPの強度信頼性評価 材料,第53巻,第1号,pp.50-56 (2004) |
|||
合田公一 , 北村佳之 , 大木順司 プレス成形および射出成形による竹繊維グリーンコンポジットの開発 山口大学工学部研究報告,第54巻,第1号,pp.119-123 (2003) |
|||
幡中憲治,大木順司,中島誠 繰返し荷重を受ける銅環状切欠部に生じる平均応力について 日本機械学会論文集A編,第69巻,第678号 pp.316-321 (2003) |
|||
K.Hatanaka, J.Ohgi, F.Fujiwara and H.Ogawa Crack Opening/Closing Behaviors under Biaxial Cyclic Loadings in Carbon Steel Proceedings of the International Conference on Experimental and Computational Mechanics in Engineering, Key Engineering Materials Vols. 243-244, pp.309-314 (2003) |
|||
J.Ohgi, M.T.Kokaly, A.S.Kobayashi and K.W.White Optimum Grain Size Based on a Grain Pullout Model of Polycrystalline Alumina Proceedings of International Symposium on Inverse Problem in Engineering Mechanics 2003 (ISIP2003), Vol.W, pp.343-351 (2003) |
|||
J.Ohgi, J.H.Jackson, A.S.Kobayashi, K.W.White A FE Model of Carbon/Carbon Composite Fracture Proceedings of 8th International Symposium on Fracture Mechanics of Ceramics (FMC8) (2003) |
|||
K.Hatanaka, J.Ohgi, A.Tomioka and K.Kaji
Crack Opening and Closing Behaviors under Cyclic Loadings in Annealed Copper JSME International Journal Ser.A, Vol.45, No.4, pp.487-494 (2002) |
|||
J. Ohgi, M. T. Kokaly, A.S.Kobayashi and
K.W.White Modeling of Grain Pullout in Polycrystalline Alumina Proceedings of CIMTEC, 3rd forum on new materials-part I, pp.181-188, 2002, (2002) |
|||
J.Ohgi, M.T.Kokaly, A.S.Kobayashi and K.W.White Modeling of Grain Pullout in Polycrystalline Alumina in WL-DCB Specimen Proceedings of International Conference on Computational Engineering & Sciences 2002 (ICES’02) (2002) |
|||
K. Hatanaka, J. Ohgi, A. Tomioka and K.Kaji
Crack Opening and Closing Behaviors under Cyclic Loadings in Annealed Copper Proceedings of Asian Pacific Conference on Fracture and Strength '01(APCFS '01) and International Conference on Advanced Technology in Experimental Mechanics '01(ATEM '01)・Vol.2・pp.718-723 (2001) |
|||
K. Hatanaka, J.Ohgi and F.Fujiwara Fatigue Crack Growth and Crack Opening/Closing Behaviors under Biaxial Loadings in Carbon Steel Proceedings of The 6th International Conference on Biaxial/Multiaxial Fatigue & Fracture・Vol.2・pp.647 -654 (2001) |
|||
大木順司,幡中憲治,善家孝夫 AFMによる銅の低サイクル疲労下における粒界段差成長挙動の観察 日本機械学会論文集A編,第67巻,第658号,pp.1043-1049 (2001) |
|||
J.Ohgi and K.Hatanaka AFM Observations of Grain Boundary Step in Low Cycle Fatigue in Copper Proceedings of 2nd International Conference on Experimental Mechanics・pp.292-296 (2000) |
|||
J.Ohgi, K.Hatanaka and T.Zenge Measurements of Step Height at Grain Boundary under Cyclic Loadings by means of AFM Proceedings of 11th International Conference on Experimental Mechanics・pp.1053-1058 (1998) |
|||
大木順司,幡中憲治,善家孝夫,瀬戸匡 弾塑性応力解析に基づく予引張負荷を受けた鋼切欠材の表面疲労き裂進展挙動の検討 日本機械学会論文集A編,第64巻,第623号,pp.1805-1811(1998) |
|||
J.Ohgi and K.Hatanaka Assessment of J-integral for Three-Dimensional Surface Crack at Notch Root JSME International Journal Ser.A, Vol.40, No.3, pp.290-297 (1997) |
|||
大木順司,幡中憲治 切欠底に存在する三次元表面き裂に対するJ積分評価 日本機械学会論文集A編,第62巻,第599号pp.1557-1564 (1996) |
|||
J.Ohgi and K.Hatanaka Assessment of J-integral for Three-Dimensional Surface Crack at Notch Root Proceedings of Asian Pacific Conference for Fracture and Strength '96, pp.253-258 (1996) |
|||
幡中憲治,大木順司,宮崎滋範 平均応力を伴う弾塑性疲労下のき裂成長に関する有限要素解析 日本機械学会論文集A編,第59巻,第566号,pp.2241-2247 (1993) |
|||
幡中憲治,大木順司,植野史 Ti-6Al-4V合金の低サイクル疲労に及ぼす熱処理の影響 材料,第42巻,第481号 pp.1153-1159 (1993) |
|||
K.Hatanaka,T.Fujimitsu and J.Ohmori Low Cycle Fatigue Life Prediction of Circumferentially Notched Cylindrical Comonents Proceedings of 3rd International Conference on Low Cycle Fatigue and Elasto-Plastic Behavior of Materials-3, Elsevier Applied Science pp.757-762, (1992) |
|||
K. Hatanaka, T. Fujimitsu, S. Shiraishi
and J. Ohmori Life Prediction of Circumferentially Grooved Components under Low-Cycle Fatigue "Advances in Fatigue Life-time Predictive Techniques", American Society for Testing and Materials, Spec. Tech. Pub., 1122 pp.402-421(1992) |
|||
K.Hatanaka, T.Fujimitsu and J.Omori Fatigue Life Prediction of Circumferentially Notched Component Based on Elastic-Plastic Fracture Mechanics Proceedings of 6th Int. Conference on Mechanical Behaviour of Materials-Y, Vol.2 pp.241-246 (1991) |
|||
幡中憲治,藤満達朗,大森順司,石本靖 鋭い環状切欠き部に生じた低サイクル疲労き裂の弾塑性破壊力学的解析と伝ぱ寿命予測 日本機械学会論文集A編,第56巻,第527号 pp.1530-1539 (1990) |